Hallo,
wir haben einen Golf V Bj 2004 mit Serienradio RCD 300, über den Wechslereingang wurde ein
Audio-Link Bluetooth AUX VW 12-Pol
angeschlossen.
Das System nach dem Einbau lief sehr gut und sauber, seit kurzem gehen in der linken Tür ab und zu die Lautsprecher aus. Über ein Verändern der Lautstärke kommt der Ton wieder.
ich hab heute mal mit dem neu erhaltenen VCDS die Fehler ausgelesen.
Zitat: |
Adresse 56: Radio Labeldatei: DRV\1K0-035-1xx-56.lbl
Teilenummer: 1K0 035 186 J
Bauteil: Radio BNO 0016
Codierung: 0020200
Betriebsnr.: WSC 76694 150 83143
VCID: 2D56A669B4002E56C6-8078
1 Fehler gefunden:
01044 - Steuergerät falsch codiert
000 - - |
Laut Hersteller des Interface braucht nichts kodiert werden, könnte mir jemand sagen wo ich hier:
0020200
Trifft diese Codingliste zu?
Zitat: |
* 00?xxxx: Treble Speaker Monitoring
o 1 = Front and Rear Monitoring inactive
o 2 = Front Monitoring active / Rear Monitoring inactive
o 3 = Front Monitoring inactive / Rear Monitoring active
o 4 = Front and Rear Monitoring active
* 00x?xxx: Radio Configuration I
o 0 = No CAN-Telephone Control
o 2 = CAN-Telephone Control
* 00xx?xx: Speaker Channels
o 0 = No passive Speakers (Sound System)
o 2 = 2 passive Speakers Front and 0 passive Speakers Rear
o 4 = 4 passive Speakers
* 00xxx?x: Sound System Correction
o 0 = No Sound System (No Correction)
o 1 = Sound System with Cloth Interior (with Open Circuit Recognition)
o 2 = Sound System with Leather Interior (with Open Circuit Recognition)
o 3 = Sound System with Cloth Interior (without Open Circuit Recognition)
* 00xxxx?: Radio Configuration II
o +2 - CD-Changer/iPod
o +4 - CAN-Secondary Display (Board Computer/large Display) |
Müsste der richtige Code dann:
0020202
lauten??